Semi-dry screed in Tashkent Texnopol.uz OOO "SVET STROY ART"

We will quickly and efficiently perform a semi-dry floor screed using modern technologies using German equipment.

The semi-dry screed technology will allow you to walk on the surface in a few hours, and high-quality finishing

does not require additional work for finishing with tiles, laminate and other materials.
Semi-dry screed is a technology for leveling the floor before the topcoat. This method of alignment has established itself as affordable, fast and high-quality. The technology allows you to get a perfectly flat surface and reduce construction time. In the process of laying, special equipment is used

for the preparation and supply of material. Advantages of a semi-dry screed:
-Higher density, which allows you to increase the strength of a building object or structural element.

Since during the preparation of the mixture, excess water does not get into it, which is excessive for the hydration of the cement, then there will be no subsequent long process of its evaporation, and with this the appearance of pores, cavities and voids. And the fewer pores in the monolith, the stronger it will be.
-The absence of pores in the hardening mass also leads to the absence of shrinkage. -The absence of the process of evaporation of excess moisture greatly accelerates the rate of maturation of the screed. When a semi-dry screed is used, the technology of its application turns out to be much cleaner than the traditional one – without dampness and sticky dirt. In the process of working with a semi-dry screed, the humidity in the room does not increase, which allows you to simultaneously engage in finishing work here.

Construction company “Texnopol”

Continuous floor screed – manually filling the required space and then leveling it with a tool. Self-leveling floor screed is a highly fluid compound applied to an airtight base.

Under its own weight, it spreads and itself creates a flat surface without the need for manual leveling.

Semi-dry floor screed – the use of two layers of screed, first dry, then conventional, used to reduce the cost of the process by reducing the consumed solution, or using a small amount of water in the solution to accelerate drying.

The additional strength of a semi-dry screed is achieved by the addition of special polymer compounds, which accelerate the adhesion processes and improve the final characteristics of the screed.

Prefabricated floor screed – also called dry screed. The surface is leveled by filling it in level with bulk material (most often with expanded clay crushed stone), followed by laying strong gypsum-fiber base plates.

Semi-dry floor screed is a modern mechanized construction technology for leveling the base for laying the topcoat. It has a number of advantages and features in comparison with the usual, familiar technology for the device of a cement-sand screed with a reinforcing mesh.

Equipment for semi– dry floor screed The main difficulty with the equipment lies in the impossibility of using a drill with a mixer attachment for mixing – the solution is too thick for this. It is necessary to rent and deliver a small-sized concrete mixer to the place of work. In warm weather, it can be installed outdoors, but in winter you will have to bring it indoors: at low temperatures, the composition freezes into lumps.